Eye Wash
ECO-MIX ™ 
 
Leonard offers a range of Thermostatic Water Mixing Valve systems to provide mixed water within specific temperature and flow ranges for Eye and Eye/Face Wash applications (ANSI Z358.1-2009). All models are factory assembled and tested, ASSE 1071 listed and 3rd party approved as lead free.  
 
To determine the amount of Hot Water needed to maintain a steady outlet temperature for 15 minutes, click Hot Water Requirements
 
This guide is not meant to be used as a means to size the hot water heaters but rather to illustrate consumption.  
 
 
Sample Specifications  
 
Thermostatic Water Mixing to meet mandated flow and temperature requirements for Eye/Face Wash  
Locked temperature setting of 85° F (29° C)  
Integral supply checkstops, wall supports  
Outlet piping with dial thermometer (range 0° to 140° F, -10° to 60° C)  
Built in cold water by-pass to allow cold water to flow in case of hot water failure  
Optional temperature override protection with secondary thermostatic valve to open cold water upon temperature rise over the set point.  
Optional, lockable cabinets, recessed or exposed, viewport  
 
These products are certified to meet Low Lead requirements of wetted surface area containing less than 0.25% lead 
by weight
 
Product Name Description
TA-350-LF Emergency Mixing Valve System with Temperature Override Protection
TA-350-LF-STSTL-EXP Emergency Mixing Valve System with Temperature Override Protection in Cabinet
TA-300 LF Eye/Face Wash
TA-300-LF-STSTL-REC Eye/Face Wash in cabinet
< Go Back