Emergency Mixing Valve System with Temperature Override Protection
Add to favorites Submit RFQ Now
PDF Catalog Page
PDF Submittal Data Sheet
PDF Operation and Maintenance
DWG CAD Drawing
PDF Service Record
• DURA-trol® solid bimetal thermostat directly linked to valve porting  
. DURA-trol® is highly responsive and cannot be damaged by extremes in temperature  
• Primary valve can be set to the correct temperature for the application.  
• Locking temperature regulator to prevent accidental movement set for 85ºF (29ºC)  
• Primary mixing valve will close down on failure of cold water supply  
• Primary Mixing Valve with special internal cold water bypass capable of 40 GPM (151 l/min) @ 30 PSI (2.1 Bar) upon failure of hot water supply  
• Adjustable high temperature limit stop set for 90ºF (32ºC)  
• Dial thermometer (range 0 to 140°F, -10 to 60°C)  
• Union angle checkstops with strainers on inlets  
• Stainless steel bellows thermostat is factory locked @ 90°F, 32°C(adjustable from 40°F to 100°F, 4°C to 32°C) to allow cold water to enter the outlet side of the Primary mixing valve.  
• Rough bronze finish  

< Go Back

Inlets 1 1/4"
Outlet 1 1/2"
Minimum Flow(GPM) 3
Maximum Flow(GPM) 126
Weight (pounds) 60
Inlet Thermometers IT