Dual Decontamination Mixing Valve System with Temperature Override Protection
|
|||||||||||||||||||||||
 |
Add to favorites |  |
Submit RFQ Now |
| Submittal Data Sheet | |
| Operation and Maintenance | |
| Maintenance Guide |
PRIMARY THERMOSTATIC WATER MIXING VALVE
• DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations.
• Primary valve can be set to the correct temperature for the application.
• Locking type temperature regulator to prevent accidental movement
• Adjustable high temperature limit stop set for 120ºF (49ºC)
• Full 1 1/4" top inlets and 1 1/4" top outlet
• Dial thermometer (range 0 to 140°F, -10 to 60°C)
• Rough bronze finish
• Union angle checkstops on inlets
REDUNDANT THERMOSTATIC CONTROL VALVE
• Stainless steel bellows adjustable thermostat to allow cold water to enter the outlet side of the Primary mixing valve.
• Remains fully closed until outlet temperature reaches set point.
• Will not allow set point temperature to be exceeded.
• Maximum supply temperature 180ºF (82ºC)
• Maximum supply pressure 125 PSI (8.6 Bar)
• DURA-trol® solid bimetal thermostat directly linked to valve porting to control the intake of hot and cold water and compensate for supply temperature and pressure fluctuations.
• Primary valve can be set to the correct temperature for the application.
• Locking type temperature regulator to prevent accidental movement
• Adjustable high temperature limit stop set for 120ºF (49ºC)
• Full 1 1/4" top inlets and 1 1/4" top outlet
• Dial thermometer (range 0 to 140°F, -10 to 60°C)
• Rough bronze finish
• Union angle checkstops on inlets
REDUNDANT THERMOSTATIC CONTROL VALVE
• Stainless steel bellows adjustable thermostat to allow cold water to enter the outlet side of the Primary mixing valve.
• Remains fully closed until outlet temperature reaches set point.
• Will not allow set point temperature to be exceeded.
• Maximum supply temperature 180ºF (82ºC)
• Maximum supply pressure 125 PSI (8.6 Bar)
| Specification | |
| Inlets | 1" |
| Outlet | 1 1/4" |
| Minimum Flow(GPM) | 3 |
| Maximum Flow(GPM) | 64 |
| Weight (pounds) | 40 |