One valve station with 3 timed outlets
|
||||||||||||||||||||||||||
 |
Add to favorites |  |
Submit RFQ Now |
| Catalog Page | |
| Submittal Data Sheet | |
| Operation and Maintenance | |
| Maintenance Guide |
RSC CONTROL CABINET
RECESSED TYPE:
Hinged panel and door, cylinder lock, stainless steel construction,
mounted as noted on drawings with:
TEMPERATURE INDICATOR: (0-200ºF, -10 TO 90ºC) with
relay and high limit protector
ON-OFF SWITCH: Double pole, double throw
TELLTALE LIGHT: Red incandescent indicator.
ZONE SWITCH: One per tempered zone, single pole, single throw
TRANSFORMER: 110VAC/24VAC 100VA isolating
transformer, fully enclosed, mounted within Control Cabinet
HIGH LOW MANIFOLD ASSEMBLY
Factory assembled and tested with:
LARGE AND SMALL TYPE XL THERMOSTATIC WATER
MIXING VALVES: Each with inlet checkstops, wall support, and outlet ball valve, dial thermometer.
INLET PIPING MANIFOLD
TEMPERATURE SENSOR: Stainless steel body with thermistor
SHOCK ABSORBER: Copper tube chamber, air charged with piston
SOLENOID VALVE: One per tempered zone, normally closed type, 125 PSI, 180ºF (82.2ºC), Brass
WIRING: Power supply and wiring to solenoid valve and sensor by others
RECESSED TYPE:
Hinged panel and door, cylinder lock, stainless steel construction,
mounted as noted on drawings with:
TEMPERATURE INDICATOR: (0-200ºF, -10 TO 90ºC) with
relay and high limit protector
ON-OFF SWITCH: Double pole, double throw
TELLTALE LIGHT: Red incandescent indicator.
ZONE SWITCH: One per tempered zone, single pole, single throw
TRANSFORMER: 110VAC/24VAC 100VA isolating
transformer, fully enclosed, mounted within Control Cabinet
HIGH LOW MANIFOLD ASSEMBLY
Factory assembled and tested with:
LARGE AND SMALL TYPE XL THERMOSTATIC WATER
MIXING VALVES: Each with inlet checkstops, wall support, and outlet ball valve, dial thermometer.
INLET PIPING MANIFOLD
TEMPERATURE SENSOR: Stainless steel body with thermistor
SHOCK ABSORBER: Copper tube chamber, air charged with piston
SOLENOID VALVE: One per tempered zone, normally closed type, 125 PSI, 180ºF (82.2ºC), Brass
WIRING: Power supply and wiring to solenoid valve and sensor by others
| Specification | |
| Inlets | 1" |
| Outlet | 1 1/4" |
| Minimum Flow(GPM) | 1 |
| Maximum Flow(GPM) | 65 |
| Certifications |
| ASSE 1017 (Valve Only) |
| ASSE 1069 (Valve Only) |