Wax Lead Free Complete Water Temperature Control Station
Model 270-LF
Add to favorites Submit RFQ Now
PDF Catalog Page
PDF Submittal Data Sheet
PDF Operation and Maintenance
ECO-MIX ™  
 
1/2” bottom inlets, 1/2" top outlet connection (copper tube) ¾” return line size with piping method #W. Locking temperature regulating handle set for Full port ball valve, pressure gauge on mixed water outlet piping of mixing valve. Dial thermometer and pressure gauge on mixed water outlet of the system. Outlet Test Connection with ball valve and ¾” hose connection with cap. Inlet piping manifold with full port ball valves and dial thermometers on supply inlets. Return piping, 1/2”, with aquastat, circulator, dial thermometer balancing valve(with positive shutoff) to balance system, and check valve Aquastat, Circulator wiring box to include a GFCI switch, red and green lights. The GFCI switch will be used to turn the circulator on or off for setup. Bypass piping, 1/2”, with check valve and isolation ball valve to cold inlet of mixing valve System mounted on strut, galvanized. Factory pre-assembled and tested as a complete system 
 
Valve assembly is certified to meet Low-Lead requirements of wetted surface area containing less than 0.25% lead by weight. All other fittings and components, the sum total of which comprise the wetted surface of this product, contain less than one quarter of one percent of lead by weight. 

< Go Back

Specification
Inlets 1/2"
Outlet 1/2"
Minimum Flow(GPM) 0.25
Maximum Flow(GPM) 12
Overall Width 28"
Overall Height 34"
Overall Depth 8"
Certifications
ASSE 1017 (Valve Only)
ASSE 1070 (Valve Only)
Valve IAPMO Certified Lead Free
Options
Less Circulator LC
Floor Mount FM
Audio Visual Alarm AL
Free Standing FS
Temperature Transmitteer TT
Temperature Data Logger TD
Building Management System Interface BMSI