Wax Lead Free Complete Water Temperature Control Station
Model XL-200-SW-2P-LF
Add to favorites Submit RFQ Now
PDF Catalog Page
PDF Submittal Data Sheet
PDF Operation and Maintenance
PDF Service Record
ECO-MIX ™  
 
Two XL-200-LF thermostatic mixing valves mounted in parallel with 3” bottom inlets 3” top outlet (copper tube), Locking temperature regulating handle set for full port ball valve, pressure gauge on mixed water outlet piping of mixing valve. Dial thermometer and pressure gauge on mixed water outlet of the system. Outlet Test Connection with ball valve and ¾” hose connection with cap Inlet piping manifold with full port ball valves and dial thermometers on supply inlets. Return piping, 1 1/2” with aquastat, circulator, dial thermometer balancing valve (with positive shutoff) to balance system, and check valve Aquastat, Circulator wiring box to include a GFCI switch. The GFCI switch will be used to turn the circulator on or off for setup. Bypass piping, 1 1/2”, with check valve and isolation ball valve to cold inlet of mixing valve System mounted on strut, galvanized. Factory pre-assembled and tested as a complete system. 
 
Valve assembly is certified to meet Low-Lead requirements of wetted surface area containing less than 0.25% lead by weight. All other fittings and components, the sum total of which comprise the wetted surface of this product, contain less than one quarter of one percent of lead by weight. 

< Go Back

Specification
Inlets 3"
Outlet 3"
Minimum Flow(GPM) 10
Maximum Flow(GPM) 208
Overall Width 70"
Overall Height 75"
Overall Depth 12"
Certifications
ASSE 1017 (Valve Only)
cUPC Listed
Valves ASSE Certified Lead Free
Options
Less Circulator LC
Audio Visual Alarm AL
Free Standing FS
Return Piping to be RP
Temperature Transmitteer TT
Temperature Data Logger TD
Building Management System Interface BMSI